| SNAPTOGGLE Heavy Duty Bolts |
Email a Friend Print this page |
|
The SNAPTOGGLE® Bolt is easy to install and provides safe installation of weight bearing devices in hollow walls, floors or ceilings.
|
|
|
|
| When installing a grab bar, you want to be sure that they are strong enough to hold in the event of a fall. That's why grab bar manufacturers usually recommend installation into a stud. However, if that's not possible, TOGGLER® brand SNAPTOGGLE® Bolts offer high quality, superior holding power in an easy to use, cost-effective design. |  |
Suitable for use in homes as well as in commercial applications, the SNAPTOGGLE® Toggle Bolts can be used on hollow walls, floors or ceilings to provide a secure place for your safety products.
Why use the SNAPTOGGLE® Toggle Bolts instead of other toggle bolts?
Strong! Holds up to 265 lbs in ½" drywall. In hollow concrete block, SNAPTOGGLE® Toggle Bolts can hold up to 1080 lbs! (DL Note: This result is dependent upon the strength and condition of the wall itself and should be used as a guide only.)
Convenient! Allows removal of bolt or fixture without losing the anchor behind the wall.
Accurate! The Toggle Bolt Anchor stays centered and won't sag.
Quick and Easy Installation! The Installation instructions are clear and easy to follow. Plus, you won't feel like you need a second pair of hands because you can pre-install the anchor without a bolt.
SNAPTOGGLE® Toggle Bolt Details:
Can be used on walls, floors or ceilings that are 3/8" to 35/8" thick made from hollow block, gypsum boards, paneling, drywall, fiberglass and more!
You will only need to drill a ½" diameter hole to install the anchor. (This is smaller than most toggle bolts.)
The clearance behind the wall or ceiling has to be at least 17/8".
Approved for government projects (as Type V anchors) and therefore are appropriate for ADA installations.
Rust resistant
If you need to install grab bars, bedside rails, shelving or any other weight bearing equipment, the SNAPTOGGLE® Toggle Bolts will make sure the equipment can bear the weight!
| Special Notes | Requires ¼"-20 bolts (A pair of 2½" L bolts are included. However you can replace these with longer ¼"-20 bolts, if needed. To determine the proper length, determine the thickness of the item you are hanging, add the thickness of the wall or ceiling, and then add an additional ½".) |
| Dimensions | Metal Anchor: 2" L x 3/8" W |
| Weight Capacity |
Weight capacity is dependent upon the strength and condition of the wall itself. These numbers should be used as a guide only. |
| Product Weight | 0.15 lb |
| Batteries/Electric | No |
| Compatibility (other devices) | Can be used on walls, floors or ceilings that are 3/8" to 35/8" thick made from hollow block, gypsum boards, paneling, drywall, fiberglass and more! |
| Made of | Stainless Steel |
| Professional Ratings | Approved for government projects (as Type V anchors) and are therefore appropriate for ADA installations. |
| Item Number | DL2603 |
| Made In | Taiwan |
| Brand Name | TOGGLER® |
| Manufacturer's Model Number | SNAPTOGGLE® |
|
||
|
Heavy Duty Fold Down Bracket
$34.00 |
|
WingIts Fastening Bolt
$31.00 |
 |
|
