SuperPole with Bar |
Email a Friend Print this page |
The SuperBar rail pivots to move with you in safe, small steps in order to provide "moving support".
|
|
|
|
Sometimes you need something to pull on or push on to provide that extra support for getting out of bed or out of the tub. The SuperBar rail pivots to move with you in safe, small steps providing "moving support". You'll notice a greater feeling of stability with the wide horizontal rail providing weight bearing support .
A gentle lift unlocks the bar to allow it to move. The SuperPole acts as the center anchor allowing the SuperBar to pivot up to 360º. The SuperBar can lock every 45º to assist with standing or sitting.
The SuperBar is an excellent alternative to the tub grab bar. It supports you while you step over the edge of the tub. Also, in situations with glass doors where you can not install a clamp-on type hand rail, the SuperBar can pivot in and out to allow the doors to close during showering. The SuperBar is 16" long.
This height adjustable pole is held "rock solid" by simple jackscrew expansion (tension-style mount) between the floor and ceiling. The jackscrew is conveniently located at the bottom of the pole and gives a generous range of fit, 93 - 99 inches high. For an additional 21" of height see the Uni-Fit Height Extender (see the Accessories Tab). Custom heights are also available by special order.
The SuperPole with SuperBar is easy to install and easy to relocate - no drilling, no screws. And it has rubber pads that ensure no marring of the ceiling or the floor.
Angled Ceiling Anchor (DL2096)
Do you need to use your SuperPole in a room with a slanted ceiling? The Angled Ceiling Anchor replaces the standard ceiling plate, allowing you to secure the Basic Superpole to slanted ceilings with a slope of 45º or 90º. (This item can be used in conjunction with the Unifit Height Extender.)
Unfortunately, the Angled Ceiling Anchor will not work with the SuperPole Heavy Duty model.
Uni-Fit Height Extender (DL2017)
The Uni-Fit extends the height of a standard SuperPole to fit any ceiling height from 100 - 120 inches. TheUni-Fit is a separate piece that slides over the top end of the SuperPole and has pre-drilled holes to adjust the height properly.
Unfortunately, the Uni-Fit Height Extender will not work with the SuperPole Heavy Duty model.
| Special Notes |
|
| Dimensions |
|
| Weight Capacity | 300 lb |
| Product Weight | 23.35 lb |
| Warranty | One Year Limited Manufacturer's Warranty |
| Batteries/Electric | No |
| Compatibility (other devices) |
|
| Made of | Powder coated heavy gauge steel, rubber pads for the ceiling piece, latex free grip |
| Item Number | DL22015 |
| Made In | Canada |
| Brand Name | Healthcraft |
"Fantastic product. I can't believe there is no dealer in this city! Many therapists have not heard of it. I am paralyzed in three quadrants but can use the Superbar for transfers between my lift chair and scooter. Am planning a second for bed to scooter transfers. Love it!" R.G. Toledo, OH
|
||
|
Bathtub Safety Rails
$29.00 |
|
Peened Grab Bars
$20.00 |
![]() |
![]() |